Wireless Sensor Network Nodes Research Articles

Hybrid optimization approach for energy minimization in wireless sensor networks leveraging XGBoost and random forest

Wireless Sensor Networks (WSNs) have garnered significant attention from both the academic and industrial communities. However, the limited battery capacity of WSN nodes imposes a set of restrictions on energy dissipations, which has compelled researchers to seek ways to save and minimize energy consumption. This paper presents a hybrid optimization model to minimize energy dissipation in Wireless Sensor Networks (WSNs). Employing linear programming and a combination of XGBoost and Random Forest algorithms, it effectively predicts internode distances and network lifetime. The results demonstrate significant energy savings in WSN deployments, outperforming traditional methods. This approach contributes to the field by offering a practical, energy-efficient strategy for WSN configuration planning, highlighting the model’s applicability in real-world scenarios, where energy conservation is critical.

Retraction Note: Pivot variable location-based clustering algorithm for reducing dead nodes in wireless sensor networks

Retraction Note: Pivot variable location-based clustering algorithm for reducing dead nodes in wireless sensor networks

Trusted Head Node for Node Behaviour Analysis for Malicious Node Detection in Wireless Sensor Networks

There has been a rise in the use of Wireless Sensor Networks (WSNs) in several fields. Depending on the malicious actions, attacks on WSN can take many forms. This research demonstrates how to leverage request and response data from each node to pinpoint the location of malicious nodes. If a node is malevolent, it will prohibit data from being sent to other nodes. They do an excellent job of pretending to be someone else. To enhance route quality, packet dropping can be used to perform a Denial of Service (DoS) assault by rejecting data packets and cutting them off from their destinations. The primary goal of this research is to expose malicious nodes within the network. To avoid being attacked by the false information fed by the adversary through compromised nodes, it is crucial to discover and isolate the nodes that have been compromised. Unfortunately, flat topology networks are difficult to keep safe because of their limited scalability and substantial communication overhead. By computing the packet drop and throughput values with valid nodes, efficient security architecture for the WSN can be proposed, allowing for the detection of malicious activity. If sensor networks are susceptible to attacks, they will be unable to fulfill their duty in a variety of event detection applications. Malicious nodes can cause unacceptable drops in event detection effectiveness and spikes in false alarm rates by producing fake readings and deceptive information. In this research, a method for identifying malicious nodes in WSNs is proposed. This research considers a Trusted Head Node (THN) for monitoring the nodes behaviour in the network to detect the malicious actions in the network. This research proposes a Trusted Head Node for Node Behaviour Analysis for Malicious Node Detection (THN-NBA-MND) in WSN. The proposed model based on node behavior analysis in frequent time intervals; detect the malicious nodes to improve the network performance in data transmission. The proposed model when contrasted with the existing model performs better in malicious node detection.

Improving the precision of time synchronization protocols in ultra-wideband networks estimating the time of flight of the radio signal

Modern applications of wireless sensor networks such as the conduction of collaborative tasks, the distributed detection of events or the alignment of data samples gathered by several nodes, require a precise time coordination of the nodes composing the network. Ultra Wide Band (UWB) technology has enabled the development of precise time synchronization protocols. The intrinsic properties of this technology allow an accurate estimation of the time of flight (ToF) of the radio signal in scenarios covering short distances. The integration of UWB transceivers in Wireless Sensor Networks (WSN) nodes is nowadays possible due to the availability of commercial chips implementing this technology. This combination facilitates the development of accurate time synchronization protocols that establish a global common clock throughout the network. In this context, the main contribution of this work is a protocol that allows the synchronization of the local clocks of these nodes with a common global reference kept in the master node. The master periodically broadcasts synchronization packets to keep the rest of the nodes synchronized. However, since the precision achieved in the time synchronization of the local clocks with UWB technology is comparable to the ToF of the RF signal for distances in the order of several meters, some considerations to estimate this delay are required. In this paper, a new algorithm is proposed that performs the estimation of the ToF of the UWB signal as well as the implementation of linear models to synchronize the local clocks of the network node, eliminating the dependence on the ToF. The experiments conducted with real devices reveal that an accuracy of tens of nanoseconds can be achieved regardless of the distance separating the network nodes.

WSN-Driven Advances in Soil Moisture Estimation: A Machine Learning Approach

Soil moisture estimation is crucial for agricultural productivity and environmental management. This study explores the integration of Wireless Sensor Networks (WSNs) with machine learning (ML) and deep learning (DL) techniques to optimize soil moisture estimation. By combining data from WSN nodes with satellite and climate data, this research aims to enhance the accuracy and resolution of soil moisture estimation, enabling more effective agricultural planning, irrigation management, and environmental monitoring. Five ML models, including linear regression, support vector machines, decision trees, random forests, and long short-term memory networks (LSTM), are evaluated and compared using real-world data from multiple geographical regions, which includes a dataset from NASA’s SMAP project, supplemented by climate data, which employs both active and passive sensors for data collection. The outcomes demonstrate that the LSTM model consistently outperforms other ML algorithms across various evaluation metrics, highlighting the effectiveness of WSN-driven approaches to soil moisture estimation. The study contributes to the advancement of soil moisture monitoring technologies, offering insights into the potential of WSNs combined with ML and DL for sustainable agriculture and environmental management practices.

Optimized Probabilistic Sink Node Deployment for Enhanced Performance in Wireless Sensor Networks

This paper presents an innovative mechanism to deploy sink nodes in Wireless Sensor Networks (WSN), which play an essential role in the gathering sensed data from sensor nodes across diverse applications. Our mechanism is different from existing mechanisms, which deploy sink nodes based on the residual status of buffer and energy of the sensor nodes. Instead, proposed mechanism’s sink node deployment is decided based on the optimal probabilistic metrics related to buffer and energy status during data processing; aim to extend the network performance with respect to risk of buffer overflow and energy consumption. We analyse and validate the performance of the proposed work through simulation and compared the results with existing residual-based sink node deployment mechanisms. The results indicate the signification extension in the performance in terms of energy, packet loss and lifetime by mitigating bottlenecks at nodes. The work contributes to the improvement of WSN design and deployment mechanisms by significantly enhancing the performance and reliability of the network. 

An Efficient Metaheuristic Technique for Wireless Sensor Network Integrated Micro Grid Environment Using Improved Whale Optimization Algorithm (Iwoa)

Wireless Sensor Network (WSN) nodes require careful power management to maintain long term operation without regular battery changes. Battery replacement can be challenging and expensive in a microgrid scenario where sensors may be installed in remote or i naccessible areas. To extend the life of WSN nodes, energy efficient design and power management strategies should be used. A potential strategy for effectively monitoring, controlling, and managing the distributed energy resources (DERs) inside a microgri d is theincorporation of WSNs with microgrids. This research work uses Improved Whale Optimization Algorithm (WOA) for optimizing the routing and performance. The humpback whale's hunting style served as the inspiration for the WOA, a metaheuristic optimization algorithm. WOA is an optimization technique that is used with MG and WSNs. During the optimization phase, WOA establishes a balance between exploitation and exploration. To increase the lifespan of a WSN in a microgrid, effective energy management i s frequently needed. When considering the dynamic energy availability from renewable sources and the energy requirements of the microgrid components, WOA is used to optimise energy allocation and routing in WSNs. This may lead to increased energy efficiency and longer network longevity. The IWOA attains 97.5% PDR that is higher than the existing state of art techniques.

Power Optimization in Wireless Sensor Network Using VLSI Technique on FPGA Platform

Nowadays, the demand for high-performance wireless sensor networks (WSN) is increasing, and its power requirement has threatened the survival of WSN. The routing methods cannot optimize power consumption. To improve the power consumption, VLSI based power optimization technology is proposed in this article. Different elements in WSN, such as sensor nodes, modulation schemes, and package data transmission, influence energy usage. Following a WSN power study, it was discovered that lowering the energy usage of sensor networks is critical in WSN. In this manuscript, a power optimization model for wireless sensor networks (POM-WSN) is proposed. The proposed system shows how to build and execute a power-saving strategy for WSNs using a customized collaborative unit with parallel processing capabilities on FPGA (Field Programmable Gate Array) and a smart power component. The customizable cooperation unit focuses on applying specialized hardware to customize Operating System speed and transfer it to a soft intel core. This device decreases the OS (Operating System) central processing unit (CPU) overhead associated with installing processor-based IoT (Internet of Things) devices. The smart power unit controls the soft CPU’s clock and physical peripherals, putting them in the right state depending on the hardware requirements of the program (tasks) being executed. Furthermore, by taking the command signal from a collaborative custom unit, it is necessary to adjust the amplitude and current. The efficiency and energy usage of the FPGA-based energy saver approach for sensor nodes are compared to the energy usage of processor-based WSN nodes implementations. Using FPGA programmable architecture, the research seeks to build effective power-saving approaches for WSNs.

FDPA internet of things system for forest fire detection, prediction and behaviour analysis

AbstractThe escalating issue of forest fires poses severe risks to ecosystems and human habitats, primarily due to the greenhouse effect and sudden climate changes. These fires, mostly occurring naturally, necessitate prompt detection and control. Addressing this, the authors introduce the Forest Fire Detection, Prediction, and Behaviour Analysis (FDPA) system, an innovative Internet of Things (IoT) solution. The FDPA system leverages a wireless sensor network to efficiently detect and analyse fire behaviour, providing real‐time data on fire spread, speed, and direction. Uniquely, it can anticipate natural fires hours before they occur by monitoring ecological parameters such as humidity, temperature, and using the Chandler Burning Index (CBI) for quantifying fire danger. Designed for the challenging forest environment, the FDPA system prioritises minimal power usage and simple components, crucial in areas with limited power resources. Its resilient design ensures the wireless sensor network and sensor nodes withstand harsh weather and fire conditions, maintaining functionality and reliability. Field tests of the FDPA system in various Jordanian forest locations, including Burgish–Ajloun, have demonstrated its effectiveness. The trials revealed the system's capability in early fire detection, low latency response, predicting fire behaviour, and determining fire spread direction. Continuous monitoring of the forest ecosystem and rapid detection allow authorities to act swiftly, preventing potential fires from escalating. Furthermore, the system tracks ecological changes within the forest, offering insights into imminent natural fires. This feature enables proactive measures to mitigate fire spread, safeguarding the environment and nearby communities. The strategic placement of sensor nodes and the use of durable yet straightforward components reduce the risk of system damage due to environmental extremities. Overall, the FDPA system emerges as a promising tool for forest fire management. Its ability to detect, predict, and analyse forest fires in real‐time positions it as a vital asset in minimising the detrimental impacts of forest fires on the environment and human settlements.

Search and Integration of Nodes in Hybrid Wireless Sensor Networks by Exploring the Connectivity Frontier

Search and Integration of Nodes in Hybrid Wireless Sensor Networks by Exploring the Connectivity Frontier

Designs of Energy Harvester for Wireless Sensor Networks

An essential part of the IoT architecture are wireless sensor networks. There has been extensive study done to identify alternative methods of powering wireless sensor networks because the nodes of wireless sensor networks are mostly power constrained. This study mainly introduces three energy collector solutions that can power wireless sensors. They are an electromagnetic vibration energy harvesting system that powers the light source of the fiber Bragg grating sensor, a solar energy collection system that uses ambient photovoltaic energy, and a wind energy harvester that uses gas elastic vibration to convert wind energy into electrical energy. The solar energy collection system is based on maximum power point tracking, in which the solar panels can provide 3W of power with a high efficiency of up to 96%; the wind energy harvester is composed of a wind generator and a power management unit, capable of operating at wind speeds of 2-9m/s, providing 70mW of power. Besides, the electromagnetic vibration energy harvesting system provides an average power output of approximately 40mW when subjected to acceleration levels greater than 0.05g. These results can serve as solutions for sustainable power output.

SECURE and energy-efficient routing protocol based on micro-segmentation and batch authentication

An effective technique in designing routing algorithms for Wireless Sensor Networks (WSNs) is named clustering nodes, which augments the network lifespan. More tasks are performed by the Cluster Heads (CHs) of the clustered WSNs, thereby consuming more energy. Hence, a secure energy-efficient Routing Protocol (RP) centered on micro-segmentation and batch authentication is proposed here. The proposed method begins by initializing the WSN nodes. After that, a random key is engendered for every node centered on their Node ID. The nodes undergo a Micro-segmentation process; in addition, they are securely grouped utilizing the Supremum Distance based K-Prototype (SD-KP) algorithm. Now, a fog layer with a number of fog nodes is initialized; also, every single micro-segmented group is assigned with an optimal fog node. Then, by using the Quasi Deterministic Sequence-Black Widow Optimization (QDS-BWO) algorithm, the optimal fog nodes are selected. By using the Root Squared- Diffie Hellman (R2-DH) technique, a key agreement is created for each group centered on their Node IDs. By using the Bitwise Cyclic Shift –BLAKE 512 (BCS-BLAKE-512) algorithm, the created keys are converted into hashcode. Now, for the purpose of performing batch authentication, the hashcode of each group is sent to the trusted authority. Subsequent to verification, data sensing occurs. Lastly, by using the Elliptic Curve Cryptography (ECC) algorithm, the data is securely encrypted and it is transmitted via the routes selected utilizing the Learned Gradient Weight Initialization-based Geography and Energy Aware Routing (LGWI-GEAR) algorithm. The proposed framework's efficacy is proved by the experimental outcomes.

A Novel Coverage Optimization Scheme Based on Enhanced Marine Predator Algorithm for Urban Sensing Systems

Ensuring the efficient operation of urban sensing systems under emergency conditions represents a current and significant challenge. To address the typical problem of low network coverage due to random deployment of wireless sensor network nodes in urban sensing systems, a novel coverage optimization scheme with an enhanced Marine Predator Algorithm (EMPA) is proposed. For a given target network monitoring area, a joint node sensing model based on Boolean sensing is constructed with the environmental information of the monitoring area as input, and then the model is optimized using EMPA for several iterations to obtain the optimized maximum network coverage and its corresponding optimal node location deployment scheme. Based on the standard MPA, firstly, the Tent chaotic map is introduced to initialize the population to maintain the population diversity of the algorithm; secondly, the adaptive jump step factor is introduced in the jump phase to improve the ability of the algorithm to jump out of the local optimum; finally, the double-subgroup location update strategy is introduced before the end of each iteration of the algorithm, which can better balance the local and global search and further enhance the algorithm’s optimal search capability. The algorithm is compared with four unimodal and multimodal benchmark test functions and applied to three network coverage optimization scenarios in urban sensing systems. The results show that the EMPA algorithm can efficiently optimize the network nodes’ uniform distribution, enhance average network coverage, and save a certain level of node deployment costs for urban sensing systems.

Intelligent Trajectory for Mobile Element in WSNs with Obstacle Avoidance

In wireless sensor networks (WSNs), mobile sink-driven data acquisition can mitigate hotspot issues, which further increases WSN efficiency, such as throughput, lifetime, and energy efficiency, while reducing delay and packet loss. Recently, most mobile sink algorithms have focused on efficient paths, and few consider obstacles in the network environment. Nevertheless, constructing an obstacle-aware trajectory in a WSN is challenging. In this context, this paper proposes a bug algorithm based on an obstacle-aware intelligent trajectory (CSOBUG) for a mobile sink to acquire data from sensor nodes in WSNs efficiently with the help of cat swarm optimization (CSO). The proposed CSOBUG algorithm has two phases: selecting visiting points and constructing a trajectory. A CSO-based clustering approach is used to select visiting points, and a bug algorithm is used to select a trajectory. Comparing CSOBUG with existing techniques, it is found that CSOBUG is less computationally intensive than the existing techniques. As well as outperforming traditional methods based on multiple performance metrics, the CSOBUG achieves superior results in a variety of scenarios.

Auto-localization algorithm for mobile sensor nodes in wireless sensor networks

Auto-localization algorithm for mobile sensor nodes in wireless sensor networks

A fault diagnosis method for wireless sensor network nodes based on a belief rule base with adaptive attribute weights

Due to the harsh operating environment and ultralong operating hours of wireless sensor networks (WSNs), node failures are inevitable. Ensuring the reliability of the data collected by the WSN necessitates the utmost importance of diagnosing faults in nodes within the WSN. Typically, the initial step in the fault diagnosis of WSN nodes involves extracting numerical features from neighboring nodes. A solitary data feature is often assigned a high weight, resulting in the failure to effectively distinguish between all types of faults. Therefore, this study introduces an enhanced variant of the traditional belief rule base (BRB), called the belief rule base with adaptive attribute weights (BRB-AAW). First, the data features are extracted as input attributes for the model. Second, a fault diagnosis model for WSN nodes, incorporating BRB-AAW, is established by integrating parameters initialized by expert knowledge with the extracted data features. Third, to optimize the model's initial parameters, the projection covariance matrix adaptive evolution strategy (P-CMA-ES) algorithm is employed. Finally, a comprehensive case study is designed to verify the accuracy and effectiveness of the proposed method. The results of the case study indicate that compared with the traditional BRB method, the accuracy of the proposed model in WSN node fault diagnosis is significantly improved.

Low-Wind-Speed Galloping Wind Energy Harvester Based on a W-Shaped Bluff Body

Galloping-based piezoelectric energy harvesting systems are being used to supply renewable electricity for low-power wireless sensor network nodes. In this paper, a W-shaped bluff body is proposed as the core component of a piezoelectric wind energy harvester. Experiments and simulations have shown that the W-shaped bluff body can improve harvesting efficiency at low wind speeds. For the W-shaped structure, the finite element simulation results indicate that the structure can help improve the aerodynamic performance to obtain high aerodynamic force. The experimental results demonstrate that compared with the traditional bluff bodies, the piezoelectric wind energy harvester with the W-shaped bluff body (WEHW) can generate higher output voltages and has a lower cut-in speed. When the length L is 30 mm and the rear groove angle β is 30°, the W-shaped structure can induce the best harvesting performance. When an external load resistance of 820 KΩ is connected and the wind speed is 5 m/s, the WEHW generates an average output power of 0.28 mW.

Hybridised swarm intelligence approach for multi-objective-based node localisation in wireless sensor network: hybrid glow-worm and cat swarm algorithm

ABSTRACT The widely used communication network is a Wireless Sensor Network (WSN), and it is utilized to track the target in different places and also it is used to monitor the disaster in the natural environment. The localization of the sensor nodes in the WSN is a critical issue. Improper localization of sensor nodes reduces the performance during communication. To alleviate the aforementioned problem, a novel approach of node localization is proposed. Especially, an effective localization model is developed for WSN by computing the displacement measure among the anchor nodes and non-anchor or unknown nodes by deriving the objective function. As the known position of anchor nodes in WSN, it is aided for finding the place of unidentified nodes using a hybrid optimization algorithm. Here, the Modernized Position-based Glowworm and Cat Swarm Optimization (MP-GCSO) algorithm is employed for deriving the multi-objective function. After allocating the position, the optimum positions are obtained by the maximum hop counts using a hybrid model. Finally, the experimentation is carried out and analyzed with various constraints and three shapes as C-shape, H-shape, and S-shape. Hence, the outcome proves that the model appropriately finds the location of an unknown node in WSN.

SVM‐SFL based malicious UAV detection in wireless sensor networks

SummaryIn the modern era, unmanned aerial vehicle (UAV) based wireless sensor networks (WSN) are rising technologies in wireless communication. Through UAV, the sensed data can be forwarded to the base station. However, the increase in network users leads to several malicious attacks on UAVs. Hence, it affects the performance of a WSN platform while transmitting private information through UAVs. Therefore, the proposed study intends to develop an effective malicious UAV detection approach using a machine‐learning algorithm. Initially, the deployed sensor nodes in WSN are utilized to collect the environmental data. These sensor nodes transmit the collected data to the UAV. During data transmission, the sensor nodes generate a feed packet (authentication parameter) and forward it to the UAV along with the sensed information. The feedback packet is encrypted through a proxy re‐encryption scheme to secure the input data. These encrypted packets with the sensed input data are then transmitted to the base station. Finally, the feedback packet is decrypted and attains the actual input information. From the received data, the classification is performed using a proposed support vector machine with a shuffled frog leap (SVM‐SFL) approach. The proposed approach is implemented with the NS3 Python tool, and the results are analyzed by evaluating several performance matrices. Compared with other existing methods, the proposed study obtained improved results in terms of accuracy (98.61%), precision (98.5%), sensitivity (98.63%), and F‐measure (98.62%).

Survey on Clustering Techniques for Wireless Sensor Networks and Cluster Head Selection Model

Low-powered wirelessly connected devices create a system that is self-contained and called Wireless sensor network (WSN), this system has a number of practical applications in the modern world. Nodes in WSN are spread out spatially and have wireless communication with other nodes in the network, these nodes are primarily dedicated to sensing the vicinity and recording the physical properties of the area, including collect observations pertaining to humidity, noise, load, temperature Sensors and other factors at a central station. From there, the end user analyzes the information. After distribution, a cluster is formed between nodes, called a cluster. One of the nodes is selected as the cluster's head, which is used to migrate the data across the network. Clustering is essential in addressing many issues in WSN, particularly in regards to their lifetime, energy savings, and interoperability. Many approaches exist for clustering WSN, the difference between them is in the choice of CH, the number of clusters, the structure of clusters, the policy for data aggregation, the efficiency of communication between clusters, and the choice of communication between internal and external clusters. This article provides a comprehensive comparison of various methods of clustering and their advantages and disadvantages in WSNs. It also describes the principles of CH selection and how it works within each category. This helps the end user to choose the most suitable one protocol for their needs, and also will assist researchers in addressing the problems revealed in the process of clustering WSN.